Kia Optima: Installation - Filler-Neck Assembly. Repair procedures - Fuel Delivery System - Engine Control/Fuel System - Kia Optima TF 2011-2024 Service ManualKia Optima: Installation

1. Installation is reverse of removal.

Filler-neck assembly bracket installation bolt :

3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

Filler-neck assembly installation screw :

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)



Removal
1. Lift the vehicle. 2. Disconnect the fuel filler hose (A). 3. Disconnect the ventilation hose (B) from the fuel tank air filter. ...

Accelerator Pedal. Repair procedures
...

See also:

Installation
1. Installation is reverse of removal. In the case of the vehicle equipped with immobilizer or but ...

Fuse Inspection
1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2. Are the fuse capacities for each circuit correct? 3. Are the ...

Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the lower (A) after loosening the mounting screws.(Refer to the BD group - "Crash pad") ...

Copyright © www.kiopman.com 2024