Kia Optima: Installation

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the EWGA connector (A). 3. Remove the shaft ...

Adjustment

1. Check that the waste gate turbo charger is cool enough to work. 2. Turn the ignition switch to OFF position. 3. Connect the diagnosti ...

See also:

Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...

Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side center pillar gives the tire pressures reco ...

Measurement Method
Projected Dimensions 1. These are the dimensions measured when the measurement points are projected into the reference plane, and are the reference dimensions used for b ...