Kia Optima: Installation
| • |
Install the component with the specified
torques. |
| • |
Note that internal damage may occur when
the component is dropped. If the component has been dropped,
inspect before installing. |
|
| • |
Insert the sensor in the installation hole
and be careful not to damage.
|
|
| 1. |
Installation is reverse of removal. |
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Remove the fuel pump service cover (A) in the trunk.
3.
...
Description
Based on information from various sensors, the ECM can calculate
the fuel amount to be injected. The fuel injector is a solenoid-operated valve
and the fuel injection amount is cont ...
See also:
Electric WGT Control Actuator. Description and Operation
Desrcription
The Electric WGT Control Actuator is installed on the turbocharger.It operates the vain in the Waste Gate Turbocharger (WGT)
and regulates the compressed air amount by the ECM's P ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the crankshaft position sensor connector
(A).
...
Vehicle Identification Number (VIN)
This is the legal identifier for your vehicle. It appears on a plate attached
to the left side of the forward portion of the dashboard. The VIN plate can be easily
seen from the outside of the v ...
Removal
Injector. Description and Operation