Kia Optima: Inspection
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the HO2S connector. |
3. |
Measure resistance between the HO2S terminals 4 and
5 [B1/S1]. |
4. |
Measure resistance between the HO2S terminals 3 and
4 [B1/S2]. |
5. |
Check that the resistance is within the specification.
Specification:
Refer to “Specification”
|
|
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the connector (A), and then remove the
sensor (B).
...
See also:
Injector. Description and Operation
Description
Based on information from various sensors, the ECM can calculate
the fuel amount to be injected. The fuel injector is a solenoid-operated valve
and the fuel injection amount is cont ...
Description and Operation
Operation
Function Of Safety Power WindowWhen all door (Front, Rear) power window auto-up
switch is operated, safety function is activated.
1.
Safety function conditionWhen
detect th ...
Driving in Flooded Areas
Avoid driving through flooded areas unless you are sure the water is no higher
than the bottom of the wheel hub. Drive through any water slowly. Allow adequate
stopping distance because brake perf ...