Kia Optima: Inspection
| 1. | Turn the ignition switch OFF. |
| 2. | Remove the ECTS (Refer to "Removal"). |
| 3. | After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 3 and 4. |
| 4. |
Check that the resistance is within the specification.
|
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the engine coolant temperature sensor
connector (A).
...
See also:
Removal and Installation
1.
Disconnect the terminals from the battery.
Tightening torque
:(+) terminal (A) : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m,
5.8 ~ 7.2lb-ft)
(-) terminal (B) : 4.0 ...
Charging System Warning
This warning light indicates
a malfunction of either the generator or electrical charging system. If the warning
light illuminates while driving:
1. Drive to the nearest safe location and careful ...
Electric type
The electric day/night rearview mirror automatically controls the glare from
the headlights of the car behind you. Adjust the rearview mirror to the desired
position.
Type A
Press the “O” butt ...
Copyright © www.kiopman.com 2024