Kia Optima: Inspection
| 1. | Connect the GDS on the Data Link Connector (DLC). |
| 2. |
Measure the output voltage of the MAPS at idle and
IG ON.
|
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the manifold absolute pressure sensor
connector (A).
...
See also:
Disassembly
If the disassembly procedure is complex, requiring many parts to be disassembled,
all parts should be disassembled in a way that will not affect their performance
or external appearance.
1.
...
Relay Box (Engine Compartment). Repair procedures
Inspection
Power Relay Test (Type A)
-
Do not use pliers.
-
Pliers will damage the
re ...
Hazard warning flasher
The hazard warning flasher serves as a
warning to other drivers to exercise
extreme caution when approaching,
overtaking, or passing your vehicle.
It should be used whenever emergency
...
Copyright © www.kiopman.com 2024