Kia Optima Manuals

Kia Optima: Inspection - Cruise Control Switch. Repair procedures - Cruise Control System - Engine Electrical System - Kia Optima TF 2011-2024 Service ManualKia Optima: Inspection

Measuring Resistance

1. Disconnect the cruise control switch connector from the control switch.
2. Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).

Function switch
 Terminal
 Resistance
CANCEL
 3 - 4
 180Ω ± 5%
SET/–
 3 - 4
 330Ω ± 5%
RES/+
 3 - 4
 550Ω ± 5%
ON/OFF
 3 - 4
 880Ω ± 5%

3. If not within specification, replace switch.
Measuring Voltage
1. Connect the cruise control switch connector to the control switch.
2. Measure voltage between terminals on the harness side connector when each function switch is ON (switch is depressed).

Function switch
 Terminal
 Voltage
CANCEL
 3 - 4
 0.76V ± 0.1V
SET/–
 3 - 4
 1.24V ± 0.15V
RES/+
 3 - 4
 1.77V ± 0.2V
ON/OFF
 3 - 4
 2.34V ± 0.22V

3. If not within specification, replace switch.
Removal and Installation
1. Disconnect the battery negative terminal. Tightening torque :4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 2. Remove th ...

Emission Control System
...

See also:

Component Location (2)
1. FOB holder 2. Door outside handle 3. Trunk lid open switch 4. FOB key ...

Owner maintenance precautions
Improper or incomplete service may result in problems. This section gives instructions only for the maintenance items that are easy to perform. As explained earlier in this section, several p ...

Crash Pad. Repair procedures
Replacement Cluster Replacement • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply ...

Categories

Kia Optima Manuals


Copyright © www.kiopman.com 2024