1. | Check the engine oil quality. Check the oil deterioration, entry of water, discoloring of thinning. If the quality is visibly poor, replace the oil. |
2. | Check the engine oil level. After engine warm up stop the engine wait 5 minutes then check the oil level. Oil level should be between the "L" and "F" marks on the dipstick. If low check for leakage and add oil up to the "F" mark.
|
Recommendation : 5W-30 ACEA A5 (If not available, refer to the recommended API or ILSAC classification)
API classification: SL or SM aboveILSAC classification : GF3, GF4 or above
ACEA Classification : A3 or A5SAE viscosity grade : Refer to the recommended SAE viscosity number
|
Line Pressure Control Solenoid Vale. Specifications
Specifications
Direct control VFS[LINE Pressure]▷ Control type : Normal low type
Control Pressure kpa(kgf/cm², psi)
500.14~9.81(5.1~0.1,72.54~1.42)
...
Installation
1.
Remove the ignition key from
the vehicle.
2.
Disconnect the battery negative
cable and wait for at least three minutes before beginning work.
3.
In ...
Removal
1.
Disconnect the battery negative
cable and wait for at least three minutes before beginning work.
2.
Remove the driver airbag module
from the steering wheel after p ...