Kia Optima: Inspection
| 1. | Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary. |
| 2. | Check the bearing for damage, abnormal noise and sluggish rotation, and replace the coolant pump assembly if necessary. |
| 3. | Check for coolant leakage. If
coolant leaks from hole, the seal is defective. Replace the coolant pump
assembly.
|
Removal and Installation
1.
Loosen the drain plug, and then
drain the engine coolant. Remove the radiator cap to drain with speed.
2.
Remove the drive belt (A) after
turning the drive belt te ...
See also:
Removal and Installation
1.
Disconnect the battery negative terminal first, then
the positive terminal.
Tightening torque
:(+) terminal : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m,
5.8 ~ 7.2l ...
Air Bag System Components
The main components of your SRS are:
An air bag in the steering wheel.
A second air bag in the passenger’s side dashboard.
A diagnostic system that continually monitors system operation.
An ...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
Copyright © www.kiopman.com 2024