1. | Press the MODE switch more then
4 times within 2 seconds while pressing the OFF switch.
* Diagnostic procedure refer to DTC code. |
Forward and backward
Push the control switch forward or backward to move the seat to the desired position.
Release the switch once the seat reaches the desired position. ...
Inspection
1.
The SJB can be diagnosed by using
the GDS. The SJB communicates with the GDS which then displays inputs and
outputs along with codes.
2.
To diagnose the SJB functi ...
Lumbar support
The lumbar support can be adjusted by pressing the lumbar support switch on the
side of the drivers seat. Press the front portion of the switch to increase support,
or the rear portion of the sw ...