Kia Optima: Inspection
3. |
Emit intensive light toward photo
sensor using a lamp, and check the output voltage change. |
4. |
The voltage will rise with higher
intensive light and reduce with lower intensive light.
1. Auto Light Signal
2. Auto Light Signal Signal
3. Photo Signal (RH)
4. Led power (BAT)
|
5. Led GND (To BCM)
6. Photo Signal (LH)
7. Photo Power (SW)
8. 5V (Vcc)
|
|
1.
Disconnect the negative (-) battery
terminal.
2.
With the (-) driver, remove the
photo sensor (A) from the center of defrost nozzle.
3.
Ins ...
See also:
Rear Heater Duct
Whenever the ventilation controls are in the face-floor or floor position, air
is directed to the rear seat passenger floor area. ...
Removal
1.
Disconnect the battery negative
cable, and wait for at least three minutes before beginning work.
2.
Remove the front passenger seat
assembly.(Refer to the Body gr ...
Rail Pressure Sensor (RPS). Description and Operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe
and measures the instantaneous fuel pressure in the delivery pipe. The sensing
element (Semiconductor element) built in ...