Kia Optima: Inspection
| 1. | Check the plated parts of the disc & hub assembly (A) for color changes, peeling or other damage. If there is damage, replace the clutch set. |
| 2. | Check the pulley (B) bearing
play and drag by rotating the pulley by hand. Replace the clutch set with
a new one if it is noisy or has excessive play/drag.
|
| 3. | Check operation of the magnetic
clutch. Connect the compressor side terminals to the battery (+) terminal and the ground battery (-) terminal to the compressor body. Check the magnetic clutch operating noise to determine the condition.
|
Installation
1.
Make sure of the length of compressor
mounting bolts, and then tighten it A→B→C→D order.
Tightening torque :20.0~32.9N.m
(2.04~3.36kgf.m, 14.7~24 ...
Disassembly
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the front tire (A) from
hub assembly.
Tightening torque :
10~15N.m (9~11kgf.m, 7.37~11lbf.ft ...
See also:
Seat
Driver’s seat
(1) Seat adjustment, forward / backward (2) Seatback recliner (3) Seat adjustment,
height (4) Lumbar support (5) Driver position memory system* (6) Seat warmer
switch* (7) Headres ...
Adjustment
1.
After loosening the trunk lid
hinge (A) mounting bolt, adjust the trunk lid by moving it up or down, or
right or left.
2.
Adjust the trunk lid height by
turnin ...
Driver’s Door Power Window Controls
The driver’s door has a master power window switch that controls all the windows
in the vehicle. the ignition switch must be in the ON position for power windows
to operate. To open a window, pr ...