1. | Disconnect the ignition switch
connector (A) and key warning switch connector (B) from the steering column.
|
2. | Check for continuity between the terminals. |
3. | If continuity is not specified,
replace the switch.
|
Inspection
1.
Ignition "OFF"
2.
Disconnect evaporator temperature
sensor.
3.
Using the multi-tester, Measure
resistance between terminal "1" ...
Engine compartment fuse
replacement
1. Turn the ignition switch and all other
switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling the cover
up.
3. Check the removed fuse; replace it if it
is blow ...
Valve Body. Description and Operation
Description
The valve body is essential to automatic transaxle control and consists of various
valves used to control the oil feed from the oil pump. Specifically, these valves
consist of pressur ...