1. | It will be able to diagnose defects of hazard switch with GDS quickly. GDS can operates actuator forcefully, input/output value monitoring and self diagnosis. |
2. | Select model and "BCM". |
3. | Select the "SJB" to check. |
4. | Select "Current data", if you
will check current data of hazard switch. It provides input/output status
of SJB.
|
Installation
1.
Installation is reverse of removal.
PCV Valve installation:
1.9 ~ 2.8 N.m (0.19 ~ 0.29 kgf.m, 1.4 ~ 2.1
lb-ft)
...
TPMS Receiver. Description and Operation
Operation
1.
General Function
A.
Spare tire inflation
/ DTC state is not displayed.
2.
General Conditions to Learn New
Sensors :
...
Manual operation
If the sunroof does not operate electrically
1. Remove the rectangular plastic lens in the front of the roof panel.
2. Turn the cross bolt with a Phillips screw driver counterclockwise to remove t ...