Kia Optima: Inspection - Panoramaroof Motor. Repair procedures - Panoramaroof - Body Electrical System - Kia Optima TF 2011-2024 Service ManualKia Optima: Inspection

1. Disconnect the negative (-) battery terminal.
2. Remove the roof trim.

(Refer to the BD group - "Roof trim")

3. Disconnect the panoramaroof motor (A) connector.

4. Ground the terminals as below table, and check that the panoramaroof unit operates.
- When inspecting the panoramaroof motor operation, panoramaroof motor and roller blind motor always should be connected.

5. Make these input tests at the connector. If any test indicates a problem, find and correct the cause, then recheck the system. If all the input tests prove OK, the panoramaroof motor must be faulty; replace it.
Terminal
Test
condition
Test: Desired result
3
IG2 ON
Check for voltage to ground:
There should be battery voltage.
1
Under all
conditions
Check for continuity to ground:
There should be continuity.
6
Under all
conditions
Check for voltage to ground:
There should be battery voltage.

6. Ground the terminals as below table, and check that the roller blind motor operates.


Panoramaroof Motor. Repair procedures
...

Resetting The Panoramaroof
Whenever the vehicle battery is disconnected or discharged, or you use the emergency handle to operate the panoramaroof, you have to reset your panoramaroof system as follows : 1. Turn th ...

See also:

Flow Diagram
Power Flow Chart P,N UD/B LR/B 26/B 35R/C OD/C OWC ● ...

Consumer Assistance
Roadside Assistance is provided on all new 2006 model Kia Vehicles from the date the vehicle is delivered to the first retail buyer or otherwise put into use (in-service date), whichever is earlie ...

Economical operation
Your vehicle's fuel economy depends mainly on your style of driving, where you drive and when you drive. Each of these factors affects how many miles (kilometers) you can get from a gallon (l ...

Copyright © www.kiopman.com 2024