Kia Optima: Inspection - Hands Free Switch. Repair procedures - Hands Free System - Body Electrical System - Kia Optima TF 2011-2024 Service ManualKia Optima: Inspection

1. Check the hands free remote control switch for resistance between terminals in each switch position.

Switch
Connector
terminal
Resistance
(±5%)
Send
2 - 5
34.1 kΩ
End of call
2 - 5
12.1 kΩ
Voice
2 - 5
3.9 kΩ


Hands Free Switch. Repair procedures
...

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the driver airbag module. (Refer to the RT group) 3. Remove the steering wheel. (Refe ...

See also:

3 Point Rear Center Belt
To fasten the rear center belt 1. Slowly pull the tongue plates out from the retractor. 2. Insert the tongue plate (A) into the open end of the buckle (C) until an audible “click" is heard, ...

When to replace seat belts
The entire in-use seat belt assembly or assemblies should be replaced if the vehicle has been involved in an accident. This should be done even if no damage is visible. Additional questions concer ...

To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with the cruise control operation or change the set speed. To ...

Copyright © www.kiopman.com 2024