Kia Optima: Inspection - Front Wiper Motor. Repair procedures - Windshield Wiper/Washer - Body Electrical System - Kia Optima TF 2011-2024 Service ManualKia Optima: Inspection

Speed Operation Check

1. Remove the connector (A) from the wiper motor.

NO
Description
NO
Description
1
GND
4
LOW
2
Parking
5
HI
3
Battery (-)



2. Attach the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 1.
3. Check that the motor operates at low or high speed as below table.

Common sources of contamination are insects, tree sap, and hot wax treatments used by some commercial car washes. If the blades are not wiping properly, clean both the window and the blades with a good cleaner or mild detergent, and rinse thoroughly with clean water.

Installation
1. Install the wiper motor. 2. Install the crank arm. Tighting torque:24.5 ~ 26.4Nm (2.5 ~ 2.7, kgf.m, 18.0 ~ 19.5 lbf.ft) ...

Front Washer Motor. Repair procedures
...

See also:

Trip Switch. Schematic Diagrams
Circuit Diagram ...

Installation
Be sure to install the harness wires so they will not pinch or interfere with other parts. 1. Remove the ignition key ...

Schematic Diagrams
Circuit Diagram ...

Copyright © www.kiopman.com 2024