Driver Door Lock Switch Inspection
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the front door trim panel. (Refer to the BD group - "Front door") |
3. | Disconnect the connector from
the power window switch module.
|
4. | Check for continuity between
the terminals in each switch position according to the table.
|
Heated Oxygen Sensor (HO2S). Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina
and is installed both upstream and downstream of the Manifold Catalytic Converter.
The sensor output voltage varies in ...
Vehicle weight
This section will guide you in the proper
loading of your vehicle and/or trailer, to
keep your loaded vehicle weight within its
design rating capability, with or without a
trailer. Properly lo ...
Seat belts - Front passenger and rear seat 3-point system with combination locking
retractor
To fasten your seat belt:
Combination retractor type seat belts are installed in the rear seat positions
to help accommodate the installation of child restraint systems. Although a combination
re ...