Front Seat Heater Switch
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the floor console upper
cover. (Refer to the BD group - "Console") |
3. | Remove the seat heater switch
connectors from the floor console upper cover (A).
|
4. | Operate each seat heater switch
and check that continuity exists between the terminals. If there is no continuity, replace the seat heater switch [A/T][M/T]
|
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the rear door trim. (Refer to the BD group - "Rear door") |
3. | Remove the power window switch(A).
|
4. | Turn rear seat heater switch
ON and check that continuity exists between the terminals. If there is no continuity, replace the seat heater switch.
|
Non-operational conditions of rear parking assist system
The rear parking assist system may not operate properly when:
1. Moisture is frozen to the sensor. (It will operate normally when the moisture
has been cleared.) 2. The sensor is covered with forei ...
Seat belt precautions
WARNING
All occupants of the vehicle must wear their seat belts at all times. Seat belts
and child restraints reduce the risk of serious or fatal injuries for all occupants
in the event of a col ...
Auto door lock/unlock feature (if equipped)
All doors will automatically lock when the transaxle shift lever is shifted
out of P (Park).
All doors will automatically unlock when the transaxle shift lever is
shifted into P (Park).
...