With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat switch.
A : Power seat control switch
B : Lumber support switch
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove wheel nuts, front wheel
and tire from front hub.
...
Checking the Automatic Transaxle Fluid Level
The automatic transaxle fluid level should be checked regularly.
The volume of the transaxle fluid changes with temperature. Although it is best
to check the level after having driven the vehicle ...
Installation
1.
Install the front fog bulb.
2.
Reconnect the lamp connector.
3.
Install the front bumper.
...