Smart Key Unit
- | Refer to the BE group - inspection / self diagnosis with GDS. |
- | Refer to the BE group - inspection / self diagnosis with GDS. |
- | Refer to the BE group - inspection / self diagnosis with GDS. |
1. | Check for continuity between
the Trunk lid open switch terminals.
|
2. | If continuity is not specified,
inspect the switch
|
Seatback angle
To recline the seatback:
1. Lean forward slightly and lift up the seatback recline lever. 2. Carefully
lean back on the seat and adjust the seatback of the seat to the position you desire.
3. R ...
Removal
Parking Assist Sensor
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the rear bumper.(Refer
to the BD group - "Rear bumper")
3.
...
Disassembly
-
Do not work in a dusty
or dirty place.
-
Do not touch the circuit
board with ...