Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal.
The horn should make a sound. If the horn fails to make a sound, replace it.
Horn Relay Inspection1. | Remove the horn relay (A) from the engine room relay box. |
2. | There should be continuity between the No.30 and No.87 terminals when power and ground are connected to the No.85 and No.86 terminals. |
3. | There should be no continuity
between the No.30 and No.87 terminals when power is disconnected.
|
Inspection
1.
Measure the output voltage between
the terminal of the wheel speed sensor and the body ground.
...
Curtain Airbag (CAB) Module. Description and Operation
Description
Curtain airbags are installed inside the headliner (LH and RH) and protect the driver
and passenger from danger when side crash occurs. The SRSCM determines deployment
of curtain airb ...
Theft-alarm stage
The alarm will be activated if any of the following occurs while the system is
armed.
A front or rear door is opened without using the transmitter (or smart
key).
The tailgate is opened wit ...