Kia Optima: Inspection
| 1. | Measure the output voltage between
the terminal of the wheel speed sensor and the body ground.
|
| 2. | Compare the change of the output
voltage of the wheel speed sensor to the normal change of the output voltage
as shown below.
|
Removal
1.
Remove the rear wheel and tire.
Tightening torque:88.3
~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the rear wheel speed ...
Yaw-rate and Lateral G Sensor. Description and Operation
Description
When the vehicle is turning with respect to a vertical axis the yaw rate sensor
detects the yaw rate electronically by the vibration change of plate fork inside
the yaw rate sensor.If ...
See also:
Suspension System. Tires/Wheels. Wheel. Repair procedures
Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:88.3 ~ 107.9N.m
(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Removal
1.
Remove the rear wheel and tire.
Tightening torque:88.3
~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the rear wheel speed ...
Torque Converter Control Solenoid Valve (T/CON_VFS). Schematic Diagrams
Circuit Diagram
...
Copyright © www.kiopman.com 2024