Kia Optima: Inspection - Front Wheel Speed Sensor. Repair procedures - ESC(Electronic Stability Control) System - Brake System - Kia Optima TF 2011-2024 Service ManualKia Optima: Inspection

1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
In order to protect the wheel speed sensor, when measuring output voltage, a 100 Ω resister must be used as shown.

2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.


V_low : 0.59V ~ 0.84V

V_high : 1.18V ~ 1.68V

Frequency range : 1 ~ 2,500Hz

Removal
1. Remove the front wheel and tire. Tightening torque:88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the front wheel spee ...

Rear Wheel Speed Sensor. Components and Components Location
Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor cable ...

See also:

Description and Operation
Refrigeration Cycle ...

Power Steering
Power steering uses energy from the engine to assist you in steering the vehicle. If the engine is off or if the power steering system becomes inoperative, the vehicle may still be steered, but it ...

Components
1. Sub frame 2. Rear lower arm 3. Trailing arm 4. Rear shock absorber 5. Assist arm 6. Rear upper arm 7. Rear stabilizer bar ...

Copyright © www.kiopman.com 2024