Kia Optima: Inspection
1. |
Check the bushing for wear. |
2. |
Check the brake pedal for bending
or twisting. |
3. |
Check the brake pedal return
spring for damage. |
4. |
Check the stop lamp switch.
(1) |
Connect a circuit tester
to the connector of stop lamp switch, and check whether or not there
is continuity when the plunger of the stop lamp switch is pushed
in and when it is released. |
(2) |
The stop lamp switch
is in good condition if there is no continuity when plunger(A) is
pushed.
|
|
1.
Turn ignition switch OFF and
disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel
and reinforcing panel. (Refer to the Body group- crash ...
Stop lamp switch clearance adjustment
If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in),
conform to below.
1.
Disconnect the stop lamp switch
...
See also:
Seat height
To change the height of the seat, move the lever upwards or downwards.
To lower the seat cushion, push down the lever several times.
To raise the seat cushion, pull up the lever several times. ...
Cruise indicator
The cruise indicator
light in the instrument cluster is illuminated only when the vehicle cruising speed
has been set using the control switch. The indicator light does not illuminate when
the m ...
Circuit Diagram (1)
Circuit Diagram (2)
Circuit Diagram (3)
...