1. | Check the strut bearing for wear and damage. |
2. | Check the spring upper and lower seat for damage and deterioration. |
3. | Compress and extend the piston
rod (A) and check that there is no abnormal resistance or unusual sound
during operation.
|
Removal
•
DON’T remove the camshaft position sensor
while the engine is running or right after engine is turned
of ...
Installation
-
Make sure that the IMS
control switch connectors and related connectors are plugged in
properly.
...
Adjusting the Front Seatback Recliner
To change the seatback angle, lean forward slightly and raise the lever located
on the outer portion of the seat. Slowly and carefully lean back to the desired
angle and release the lever. After ...