Kia Optima: Inspection
1. |
Check the driveshaft boots for
damage and deterioration. |
2. |
Check the driveshaft spline for
wear or damage. |
3. |
Check that there is no water
or foreign material in the joint. |
4. |
Check the spider assembly for
roller rotation, wear or corrosion. |
5. |
Check the groove inside the joint
case for wear or corrosion. |
6. |
Check the dynamic damper for
damage or cracks. |
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove wheel nuts, front wheel
and tire from front hub.
...
•
Do not disassemble the
BJ assembly.
•
Special grease must be
applied to the d ...
See also:
Engine Cooling System
The high-pressure cooling system has a reservoir filled with year-round antifreeze
coolant. The reservoir is filled at the factory.
Check the antifreeze protection and coolant level at least once a ...
Tachometer
The tachometer indicates the approximate number of engine revolutions per minute
(rpm).
Use the tachometer to select the correct shift points and to prevent lugging
the engine and/or overrevvin ...
Manual Antenna
Your car uses a manual stainless steel antenna to receive both AM and FM broadcast
signals. Pull up the antenna using your fingers, as shown in the drawing.
✽ NOTICE
Before entering an au ...