Kia Optima: Inspection
1. |
Turn ignition switch OFF.
|
2. |
Disconnect the oil temperature
sensor connector. |
3. |
Measure resistance between sensor
signal terminal and sensor ground terminal. |
4. |
Check that the resistance is
within the specification. |
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
See also:
Recommended cold tire inflation
pressures
All tire pressures (including the
spare) should be checked when the
tires are cold. “Cold Tires” means the
vehicle has not been driven for at
least three hours or driven less than
1.6 km (on ...
ENGINE START/STOP button position
OFF
Not illuminated
• With automatic transaxle
To turn off the engine (START/RUN position) or vehicle power (ON position), press
the ENGINE START/STOP button with the shift lever in the P (Park ...
Removal
Brake Booster
1.
Turn ignition switch OFF and
disconnect the negative (-) battery cable.
2.
Remove the air duct (B) and air
cleaner assembly (A).
...