Kia Optima: Inspection
| 1. | Turn ignition switch OFF. |
| 2. | Disconnect the oil temperature sensor connector. |
| 3. | Measure resistance between sensor signal terminal and sensor ground terminal. |
| 4. | Check that the resistance is within the specification. |
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
See also:
Battery replacement
Type A
Type B
A battery should last for several years, but if the transmitter or smart key
is not working properly, try replacing the battery with a new one. If you are unsure
how to use or ...
Inspection
1.
Check the rear stabilizer bar
for deformation.
2.
Check the rear stabilizer link
ball joint for damage.
...
Component Location Index
Engine Room
1. Receiver Drier
2. Condenser
3. Service Port (High)
4. Service Port (Low)
5. A/C Pressure Transducer
6. Compressor
7. Expansion Val ...
Copyright © www.kiopman.com 2024