Kia Optima: Inspection
| 1. | Turn ignition switch OFF. |
| 2. | Disconnect the oil temperature sensor connector. |
| 3. | Measure resistance between sensor signal terminal and sensor ground terminal. |
| 4. | Check that the resistance is within the specification. |
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
See also:
ENGINE START/STOP button position
OFF
Not illuminated
• With automatic transaxle
To turn off the engine (START/RUN position) or vehicle power (ON position), press
the ENGINE START/STOP button with the shift lever in the P (Park ...
Troubleshooting
Troubleshooting
Symptom
Possible cause
Remedy
Tachometer does not operate
Cluster fuse (10A) blown
Check for short and replac ...
Installation
Parking Assist Sensor
1.
Connect the connector, and then
install the sensor.
2.
Install the rear bumper.
Buzzer
1.
Install the buzzer.
2.
In ...
Copyright © www.kiopman.com 2024