Kia Optima: Inspection
1. |
Turn ignition switch OFF.
|
2. |
Disconnect the oil temperature
sensor connector. |
3. |
Measure resistance between sensor
signal terminal and sensor ground terminal. |
4. |
Check that the resistance is
within the specification. |
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
See also:
Owner maintenance precautions
Improper or incomplete service may
result in problems. This section gives
instructions only for the maintenance
items that are easy to perform.
As explained earlier in this section, several
p ...
Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is
seen. Make this adjustment before you start driving.
WARNING - Rear visibility
Do not place objects in the rear seat ...
Removal
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the auto light sensor
(A) from crash pad upper side by using screw (-) driver.
...