Kia Optima: Inspection - 26 Brake Control Solenoid Valve(26/B_VFS). Repair procedures - Automatic Transaxle Control System - Automatic Transaxle System - Kia Optima TF 2011-2024 Service ManualKia Optima: Inspection

1. Turn ignition switch OFF.
2. Disconnect the oil temperature sensor connector.
3. Measure resistance between sensor signal terminal and sensor ground terminal.
4. Check that the resistance is within the specification.

26 Brake Control Solenoid Valve(26/B_VFS). Repair procedures
...

Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraulic pre ...

See also:

Electronic Parking Brake (EPB). Description and Operation
Description The EPB is an electronic parking brake. The EPB is different from existing parking systems which operated with the brake pedal or the lever type. The EPB system sends the signal to th ...

Removal
In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by ...

Record your key number
The key code number is stamped on the bar code tag attached to the key set. Should you lose your keys, this number will enable an authorized Kia dealer to duplicate the keys easily. Remove the b ...

Copyright © www.kiopman.com 2024