Kia Optima: Inspection
1. |
Turn ignition switch OFF.
|
2. |
Disconnect the oil temperature
sensor connector. |
3. |
Measure resistance between sensor
signal terminal and sensor ground terminal. |
4. |
Check that the resistance is
within the specification. |
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
See also:
Installation
Refer to "High Pressure Fuel Pump" in this group.
...
Installation
•
Install the component with the specified
torques.
•
Note that internal damag ...
Operating door locks from outside the vehicle
Turn the key toward the rear of the vehicle to unlock and toward the front
of the vehicle to lock.
If you lock/unlock the door with a key, all vehicle doors will lock/unlock
automatically ...