Kia Optima: Inspection
| 1. | Turn ignition switch OFF. |
| 2. | Disconnect the oil temperature sensor connector. |
| 3. | Measure resistance between sensor signal terminal and sensor ground terminal. |
| 4. | Check that the resistance is within the specification. |
Removal
1.
Remove the battery and the battery
tray. (Refer to "Charging system" in EE group.)
2.
Remove the under cover (A).
Tightening torque:7.8 ~
11 ...
See also:
Inspection
Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal.
The horn should make a sound. If the horn fails to make a sound, replace it.
Horn Relay Inspection
1.
...
Replacement
1.
Remove the front wheel & tire.
Tightening torque:88.3
~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Gasoline Containing Alcohol and Methanol
Gasohol, a mixture of gasoline and ethanol (also known as grain alcohol), and
gasoline or gasohol containing methanol (also known as wood alcohol) are being marketed
along with or instead of leade ...
Copyright © www.kiopman.com 2024