Kia Optima: Inspection
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the CCV connector. |
3. |
Measure resistance between the CCV terminal 1 and
2. |
4. |
Check that the resistance is within the specification.
Specification:
Refer to "Specification"
|
|
5. |
Disconnect the vapor hose connected with the canister
from the CCV. |
6. |
Connect a vacuum pump to the nipple. |
7. |
Ground the CCV control line and apply battery voltage
to the CCV power supply line. |
8. |
Apply vacuum and check the valve operation.
Specification:
Vacuum maintained
|
|
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Lift the vehicle.
3.
Disconnect the canister close valve co ...
See also:
Valve Body. Description and Operation
Description
The valve body is essential to automatic transaxle control and consists of various
valves used to control the oil feed from the oil pump. Specifically, these valves
consist of pressur ...
Disassembly
•
Do not disassemble the
BJ assembly.
•
Special grease must be
applied to the d ...
Rheostat. Repair procedures
Inspection
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3.
...