Kia Optima: Inspection
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the RCV control solenoid valve connector. |
3. |
Measure resistance between the valve terminals 1
and 2. |
4. |
Check that the resistance is within the specification.
Specification:
Refer to “Specification”
|
|
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Remove the RCV control solenoid valve (A) after disconnect
the connector, ...
See also:
Inspection
1.
Check each part for cracks, damage
or wear, and replace the coolant pump assembly if necessary.
2.
Check the bearing for damage,
abnormal noise and sluggish rotat ...
In the Event of Brake Failure
If the service brakes should fail to operate while the vehicle is in motion,
you can make an emergency stop with the parking brake. The stopping distance, however,
will be much greater than normal ...
Components and Components Location
Component Location
1. Windshield wiper arm & blade
2. Wiper & washer switch
3. Windshield washer hose
4. Windshield wiper motor & linkage
5. Washer mo ...