Kia Optima: Inspection
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the OCV connector. |
3. |
Measure resistance between the OCV terminals 1 and
2. |
4. |
Check that the resistance is within the specification.
Specification:
Refer to “Specification”
|
|
[Bank 1 / Intake]
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Remove the OTS (A).
3.
Disco ...
See also:
Components and Components Location
Component Location
1. Head lamp leveling unit
2. Head lamp leveling actuator
...
Trunk room lamp
The trunk room lamp comes on when the trunk is opened.
CAUTION
The trunk room lamp comes on as long as the trunk lid opens. To prevent unnecessary
charging system drain, close the trunk lid sec ...
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal (A).
Tightening torque
:4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) ...