Kia Optima: Inspection
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the PCSV connector. |
3. |
Measure resistance between the PCSV terminals 1 and
2. |
4. |
Check that the resistance is within the specification.
Specification:
Refer to “Specification”
|
|
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the purge control solenoid valve connector
(A).
3. ...
See also:
Water pump. Components and Components Location
Components
1. Water pump pulley
2. Water pump sub assembly
3. Water pump gasket
4. Water pump cover
5. Water pump cover gasket
6. O-ring
7. Water inle ...
Adjustment
Adjusting method for T/M control cable
1.
Make sure vehicle does not roll
before setting room side shift lever and T/M side manual control lever to
"N" pos ...
Impact sensing door unlock system (if equipped)
All doors will automatically unlock when an impact causes the air bags to deploy. ...