Kia Optima: Inspection - Rail Pressure Sensor (RPS). Repair procedures - Engine Control System - Engine Control/Fuel System - Kia Optima TF 2011-2024 Service ManualKia Optima: Inspection

1. Connect the GDS on the Data Link Connector (DLC).
2. Measure the output voltage of the RPS at idle and various engine speed.

Condition
Output Voltage (V)
Idle
 Approx. 1.2
1,500 rpm
 2.0 ~ 2.2
6,300 rpm
 Approx. 2.8


Rail Pressure Sensor (RPS). Repair procedures
...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line (Refer to “Release Residual Pre ...

See also:

Engine Mounting. Components and Components Location
  1. Transaxle mounting bracket 2. Roll rod bracket 3. Sub frame 4. Engine mounting bracket 5. Engine mounting support bracket ...

Description
According to driving environment and loading state of vehicle, head lamp lighting direction is changed to keep the driver's visibility range and to protect the driver's vision from glare, ...

Anti-lock brake system (ABS)
WARNING ABS (or ESC) will not prevent accidents due to improper or dangerous driving maneuvers. Even though vehicle control is improved during emergency braking, always maintain a safe distance ...

Copyright © www.kiopman.com 2024