Kia Optima: Input Speed Sensor. Repair procedures

Input Speed Sensor. Troubleshooting

Signal Waveform Fig 1) Input/Output speed sensor at low speedFig 2) Input/Output speed sensor at high speed ...

Inspection

1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

See also:

Engine compartment fuse replacement
1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling the cover up. 3. Check the removed fuse; replace it if it is blow ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the crankshaft position sensor connector (A). ...

Installation
1. Install the smart junction box. 2. Install the crash pad lower panel. 3. Check that all system operates normally. ...