Replacement
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") |
3. | Disconnect the 5P connector of
the SMARTRA unit and then remove the SMARTRA unit (A) after loosening the
bolt. [USA]
|
4. | Disconnect the immobilizer unit
connector and then remove the immobilizer unit(A) and bracket after loosening
a shear bolt or removing the unit from the mounting bracket (B) using a
flat-up screwdriver.
|
5. | Installation is the reverse of removal procedure. |
Manifold Absolute Pressure Sensor (MAPS). Schematic Diagrams
Circuit Diagram
...
Description and Operation
Cruise Control
The cruise control system is engaged by the cruise "ON/OFF"
main switch located on right of steering wheel column. The system has the capability
to cruise, coast, accel ...
Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pushing the fuel
filler lid opener button.
✽ NOTICE
If the fuel filler lid will not open because ice has formed around it, ta ...