When you select the Floor, Floor-Defrost or Defrost position, the system automatically turns on the outside (fresh) air position will be selected.
If you don’t want the outside (fresh) air position when operating in either of these modes, you can turn off the system operation by performing the following:
1. Make sure the engine is running or the ignition switch is in the ON position.
2. Turn the fan speed control knob to the “0” position.
3. Turn the mode selection knob to the defrost ()
position.
4. Push the air intake control button ()
at least 5 times within 3 seconds.
5. Then the indicator light on the air intake control button ()
will blink 3 times with 0.5 second intervals between blinks.
If you want to return to the automatic outside (fresh) air position, repeat the procedure above.
Components(2)
1. Rear bumper cover
2. Rear reflector
3. Rear bumper lower cover
4. Rear bumper energy absorber
5. Wiring harness
6. Rear bumper beam assembly
...
Rear Wheel Speed Sensor. Components and Components Location
Components
1. Rear wheel speed sensor
2. Rear wheel speed sensor cable
...
Body Control Module (BCM). Specifications
Specifications
Items
Specifications
Rated voltage
DC 12V
Operating voltage
DC 9 ~ 16V
Operating temper ...