1. Start the engine.
2. Set the mode to the desired position. To improve the effectiveness of heating and cooling :
- Heating:
- Cooling:
3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air or recirculated air position.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system (if equipped) on.
Removal
Brake Booster
1.
Turn ignition switch OFF and
disconnect the negative (-) battery cable.
2.
Remove the air duct (B) and air
cleaner assembly (A).
...
Emergency
Towing
There are three popular methods of towing a vehicle :
-
The operator loads the
vehicle on the back of truck. This is best way of transporting the vehicle.
-
The t ...
Inspection
Remove the overhead console lamp assembly then check for continuity between terminals.
If the continuity is not as specified, replace the map lamp switch.
...