Replacement
1. | Disconnect the negative (-) battery terminal. |
2. | Using the screwdriver, remove
the side cover (A).
|
3. | Loosen the mounting screw and
then remove the crash pad lower cover (A).
|
4. | Disconnect the connector (A),
and then remove the crash pad lower cover.
|
5. | Using the screwdriver, remove
the center garnish (A).
|
6. | Loosen the mounting screw and
then remove the blower & A/C controller (A).
|
7. | Disconnect the center connectors
and then remove the blower & A/C controller (A).
|
8. | Loosen the mounting and then
remove the center fascia box (A).
|
9. | Loosen the mounting screws and
then remove the blower & A/C controller (A).
|
10. | Installation is the reverse order of removal. |
Specifications
Specification
Item
Resistance (Ω)
Driver Airbag (DAB)
1.88 ~ 5.8
Passenger Airbag (PAB)
1.88 ~ 5.8
...
SRS Care
The SRS is virtually maintenance-free and so there are no parts you can safely
service by yourself. If the SRS air bag warning light does not illuminate, or continuously
remains on, have your vehi ...
Roof Trim. Repair procedures
Replacement
Sunvisor Replacement
•
Use a plastic panel removal
tool to remove interior trim pieces to protect from ...