Kia Optima: Heated Oxygen Sensor (HO2S). Specifications
Specification
HO2S [Bank 1/Sensor 1]|
Item |
Specification |
|
Heater Resistance (Ω) |
2.5 ~ 4.0 [20°C(68°F)] |
HO2S [Bank 1/Sensor 2]
|
A/F Ratio (λ) |
Output Voltage(V) |
|
RICH |
Approx. 0.9 |
|
LEAN |
Approx. 0.04 |
|
Item |
Specification |
|
Heater Resistance (Ω) |
3.3 ~ 4.1Ω[21°C(69.8°F)] |
Heated Oxygen Sensor (HO2S). Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina
and is installed both upstream and downstream of the Manifold Catalytic Converter.
The sensor output voltage varies in ...
Heated Oxygen Sensor (HO2S). Schematic Diagrams
Circuit Diagram
...
See also:
Inspection
1.
Check the plated parts of the
disc & hub assembly (A) for color changes, peeling or other damage. If there
is damage, replace the clutch set.
2.
Check the pull ...
Tire terminology and definitions
Air Pressure: The amount of air
inside the tire pressing outward on
the tire. Air pressure is expressed in
pounds per square inch (psi) or kilopascal
(kPa).
Accessory Weight: This means the
...
Antenna. Repair procedures
Inspection
Glass Antenna Test
1.
Wrap aluminum foil (A) around
the tip of the tester probe (B) as shown.
2.
Touch one tester probe to the
glass antenna termin ...
Copyright © www.kiopman.com 2024