WARNING - Halogen Bulbs
1. Remove the headlight bulb cover by turning it counterclockwise.
2. Disconnect the headlight bulb electrical connector.
3. Unsnap the headlight bulb retaining wire.
4. Remove the bulb from the three (3) slots on the headlight assembly.
5. Install a new headlight bulb in the three (3) slots on the headlight assembly
and snap the headlight bulb retaining wire into position.
6. Connect the headlight bulb electrical connector.
7. Install the headlight bulb cover by turning it clockwise.
Oil And Filter Replacement
•
Prolonged and repeated
contact with mineral oil will result in the removal of natural fats
from the skin, ...
Tire sidewall labeling
This information identifies and
describes the fundamental characteristics
of the tire and also provides
the tire identification number (TIN)
for safety standard certification. The
TIN ca ...
Inhibitor Switch. Specifications
Specifications
▷ Type: Combination of output signals from 4 terminals
Power supply (V)
12
Output type
Combination of output signals
...