The hazard warning flasher causes the rear tail lights and front turn signal lights to flash on and off, which serves as a warning to other drivers to exercise caution when approaching or passing your vehicle.
To activate the flasher, depress the hazard warning flasher switch. This switch operates in any ignition switch position.
To turn the flashers off, depress the switch again.
Inspection
1.
Disconnect the ignition switch
connector (A) and key warning switch connector (B) from the steering column.
2.
Check for continuity between
the ter ...
Disassembly
If the disassembly procedure is complex, requiring many parts to be disassembled,
all parts should be disassembled in a way that will not affect their performance
or external appearance.
1.
...
Front fog light switch
To turn on the front fog lights, place the switch in the “ON” position. They
will come on when the headlight switch is in the first or second position. ...