Inspection
1. | Remove the trunk room left side
trim. (Refer to the BD group - "Interior trim") |
2. | Remove the fuel filler door release
actuator (A) after loosening the mounting bolts.
|
3. | Disconnect the release actuator
connector (A).
|
4. | Check for continuity between
terminal No.1 and No.2. If there is no continuity, replace the fuel filler door release actuator. |
Schematic
Diagrams
Schematic Diagram
...
Trip Switch. Schematic Diagrams
Circuit Diagram
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Disconnect the engine coolant temperature sensor
connector (A).
...