Inspection
1. | Remove the driver door trim. (Refer to the BD group - "Front door") |
2. | Remove the switch assembly connector
(A) from the door trim.
|
3. | Check for continuity between
the terminal No.1 and No.2.
|
4. | Remove the fuel filler door switch
assembly (A) after pressing the fixing clips (B).
|
Child seat lower anchors
Some child seat manufacturers make child restraint seats that are labeled as
ISOFIX or ISOFIX-compatible child restraint seats. These seats include two rigid
or webbing mounted attachments that ...
Description and Operation
Description
EPS (Electric power steering, Column assist type) system uses an electric motor
to assist the steering force and it is an engine operation independent steering
system.
EPS control m ...
Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents are
as follows:
1.
Connect self-diagnosis connector(16pins)
located in the lower of driver side crash pad to ...