To flash the headlights, pull the lever toward you. It will return to the normal position when released. The headlight switch does not need to be on to use this flashing feature.
Inspection
[Fuel pump]
1.
Turn the ignition switch OFF, and then remove battery
(-) cable.
2.
Remove the fuel pump assembly.
3.
Check motor operatio ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and
IG ON.
Specification:
Refer to " ...
Reassembly
1.
Install the hub bearing to the
knuckle assembly.
(1)
Lay the knuckle assembly
(A) on press.
(2)
Lay a new hub bearing
upon the k ...